Fountains & Aeration Solutions

Decorative Display Fountains

Surface-mounted fountains create dramatic vertical water patterns ideal for HOA entrances, corporate campuses, estate ponds, and golf-course focal points. We install AquaMaster, Kasco, Otterbine, and Vertex units, ranging from ½ HP for quarter-acre ponds up to 10 HP tri-phase systems for multi-acre lakes. Optional LED lighting turns the fountain into a nighttime landmark.

Fountain Selection Checklist

• Minimum depth: 4 feet recommended, 5+ feet ideal.
• Power: 120V for <1 HP units, 240V/three-phase for 3 HP+.
• GFCI-protected dedicated circuit per National Electrical Code (NEC) Article 680.
• Pattern: single-tier V, two-tier crown, or three-tier trumpet based on pond width and sight lines.
• Throw height should not exceed 60% of pond width to prevent wind-blown spray on surrounding lawns or walkways.

Subsurface Diffused Aeration

Decorative fountains aerate only the top few feet. For ponds deeper than 7 feet, diffused aeration is the workhorse — a shoreline-mounted compressor pushes air through weighted lines to membrane diffusers on the bottom, turning the column over and oxygenating the entire volume.

Maintenance & Winterization

• Spring startup: compressor inspection, diffuser cleaning, fountain nozzle reassembly, and GFCI test.
• Monthly: check intake screens, inspect mooring lines, verify amp draw.
• Fall winterization: fountain pulled and stored; aeration either kept running (with compressor housing heat) to prevent winter fish kill or winterized depending on pond depth.
• Warranty service: we are factory-authorized dealers/service centers for the major brands — no third-party hand-offs.

Solar and Off-Grid Options

For remote estate ponds or agricultural locations without electrical service, solar diffused aeration systems (Keeton, Outdoor Water Solutions) deliver 1–2 CFM during daylight hours with optional battery banks for nighttime operation. Sized per application.